Acrylic Deck Installation Guide for Scooters

Installing an acrylic deck on your scooter can enhance its aesthetics and provide a custom look. Below is a step-by-step guide to properly installing an acrylic deck while maintaining stability and safety.

Standard Installation (Recommended)

1. Remove the Existing Deck Cover

   • Unscrew all screws holding the current deck cover in place.

   • If a silicone mat covers the screws, peel it back to reveal and remove the screws.

2. Place the Acrylic Deck

   • Position the acrylic deck where the original deck cover was.

   • You may need to drill new holes in the acrylic deck if the default holes do not line up.

     • Recommended hole size: 6mm.

     • Since the acrylic deck is placed between the frame and the original deck cover, holes do not need threading or countersinking.

     • To be precise, measure the diameter of the screws that will pass through the holes.

3. Reinstall the Original Deck Cover

   • Place the original deck cover over the acrylic deck.

   • Screw everything back in place.

   • For extra stability, consider using slightly longer screws to account for the added height of the acrylic deck.

4. Completion

   • Once all screws are secure, the installation is complete.

Alternative Installation (Acrylic Deck on Top – Not Recommended)

1. Repeat Steps 1 and 2 from the standard installation.

2. Do Not Reinstall the Original Deck Cover.

3. Ensure screws can securely hold the acrylic deck in place.

   • May need longer or different screws.

   • Avoid flathead screws, as they may stick out.

   • Countersinking or threading holes is an option, but requires specialized tools.

   • Prefer screws with large socket heads to keep both the deck and rider’s feet stable.

4. Optional: Add grip tape or a silicone mat for traction, though this is not officially recommended due to reduced grip of acrylic compared to the original deck cover.