Some riders of the Teverun 7260R may notice a front-to-back wobble or looseness in the folding mechanism after extended use or transportation. This is a common issue and can be resolved quickly with a simple adjustment.
Cause
-
The wobble is usually due to the tension-adjustment hex bolt on the folding joint beneath the stem.
-
Over time, this bolt can loosen slightly, causing noticeable shake when riding.
Solution: Tighten the Folding Joint
-
Fold the stem fully until it locks in the folded position.
-
Locate the hex bolt on the folding hinge, visible when the scooter is folded.
-
Tighten the bolt with a hex key (Allen wrench):
-
Turn clockwise in small increments.
-
Do not overtighten — tighten just enough to reduce play while still allowing the scooter to fold and lock securely.
-
-
Unfold and test the scooter for stability. Repeat if any movement persists.
Tools Required
-
6mm or 8mm hex key (depending on your scooter version — confirm with your unit)
Pro Tip
-
Check this bolt regularly, especially if you ride aggressively or fold/unfold frequently.
-
This simple adjustment helps keep the front-end stable and ensures a safer ride.