How to Use and Manage the Fingerprint Scanner on Your Scooter

The fingerprint scanner on your scooter provides a secure and convenient way to unlock and ride. Follow this guide to register, add, and reset fingerprints effectively.

Initial Setup and Finger Registration

1. Power On the Scooter

   • A blue flashing light indicates the scanner is active.

2. Check for Existing Fingerprints

   • Tap your finger on the scanner. A green light means no fingerprints are registered yet.

3. Register Your Finger

   • Hold the finger you want to register on the reader until a solid blue light appears. This puts the scanner into programming mode.

   • Keep pressing that finger repeatedly until the light turns light blue.

   • Your finger is now registered.

4. Test the Fingerprint

   • Power the scooter off and back on.

   • Test the registered finger to unlock.

   • Any unregistered finger will show a red light.

Registering Additional Fingers

1. Turn the scooter off and on.

2. Unlock with a registered finger.

3. Hold the registered finger on the scanner for ~5 seconds until the light turns solid blue (registration mode).

4. Touch the scanner with a new finger until the light turns light blue.

5. Power off and on. Both fingers should now be registered.

   • The scanner can store up to 10 fingerprints.

Unregistering All Fingerprints

1. Power the scooter off and on.

2. Unlock with a registered finger and release.

3. Hold that finger on the scanner for 10 seconds until the light turns red.

4. This resets the scanner to factory settings.

5. You can now start registering fingerprints from scratch.

Resetting Fingerprints via Scanner Button

• There is a reset button inside the scanner.

• Press and hold it for 20 seconds to clear all stored fingerprints.

By following these steps, you can easily manage your scooter’s fingerprint scanner, adding convenience and security to your rides.